Polishing will smooth out scratches and imperfections in your car's paint by giving your car the impression of an impeccable appearance.
When renewing the colour of the car, we pay special attention to both the main parts of the body and its less noticeable details, such as: roof, sills, bumper diffusers, struts, etc. The advanced body polishing method removes 90% of scratches while maintaining the maximum amount of varnish. The process of restoring the varnish takes approximately 1-2 days. We recommend applying the ceramic coating on the body immediately after polishing. This will help to protect the body from minor damage or scratches for longer. It will also give a shine and saturation!
This is a glass with an adjustable dimming function that allows you to tint the machine at any time. At the same time, repeating the exact geometry of your regular glasses. As raw materials, glass of the highest quality Pilkington is used, the glasses are made according to the 3-D matrix of the original glass and are installed instead of your regular glasses. Possibility of regulation of light transmission from 82% to 5%.
A conductive busbar is located along the glass contour. When voltage is applied, the tinting process starts from the edge to the center. Voltage is supplied using a special controller, which is individually programmed for each glass model. Management is possible both with the help of a button (on / off), and with the help of a knob that allows you to set any dimming level, depending on the ambient light.
Glass retains its absolute transparency both on and off. Only light transmission changes. That is, when you press the button, the glass begins to tint, thereby creating the effect of classical tinting. Visibility through the glass is absolute, either through glass with a tinted film, or through sunglasses.
Glasses manufactured by ON GLASS are installed instead of regular glasses in regular places. Modifications to the door structure are not required. Electrochromic glass has similar operating characteristics with standard glasses, a feature is the electrical part that is directly related to glass tinting processes.
During the first 45-60 seconds, about 70% of the glass area is darkened, and during the remaining 30-40 seconds the glass is completely tightened. The process of turning off the glass is carried out similarly.
ElectroToning is a solid triplex protected by an armor plate on both sides. In order to make electric tinting for a specific car, two halves are molded from direct glass and assembled in triplex. At the same time, a space is created between the two glasses, it is it that is filled with a special polymer, which is subsequently polymerized. A conductive busbar is located along the glass contour.